Catalog MakerBot 2
Aluminium Filament Drive $95.00

Aluminium Filament Drive

The filament drive extruder upgrade for the MakerBot Replicator 2 from Prop Engineering will replace the plastic printed type versions and also the original MakerBot 2 Delrin plunger system with an all Aluminium pinch roller type. The filament drive arm and drive arm mounting block parts are CNC Machined from Aircraft grade 2420 Aluminium with the filament drive supplied assembled with no modification to any part of the MakerBot Replicator 2

The pinch roller provides about 65 to 70N of force on the filament, this will provides enough driving pressure on the filament.

Unlike other printed plastic designs that will eventually distort due to heat and spring pressure been exerted on the bearing arm as well as other plastic parts. The filament drive uses a brass pivot bush for a much improved for low friction surface for the filament drive arm to rotate on, this also will allow the mounting screw to be fully tightened so there is no chance of it working or vibrating loose over sustained use.

The Delrin plunger drive arrangement on the MakerBot Replicator 2 uses a grub screw seated on a rubber O-ring to provide pressure on the plastic disc to keep it in contact with the filament, this plastic disc over a very short time will fail by design, by waring a groove in the disc, with adjustment of the plunger grub screw, this requires the extruder unit to be partially disassembled not at all good design.

The blower fan uses self-tapping screws and removing and inserting those screws into plastic threads will eventually strip the plastic and become useless and no longer work, and then you will need to look for a replacement fan shroud.

The variations in filament diameter can very from 1.5mm,1.7mm to 1.8mm and the original makerbot 2 Delrin drive can not accommodate for this variation in filament size."

The Filament Drive is under development and will change due to design evolution
shown is the Mk1, current design version has more than 2400 hrs of printing without failing due to heat and extreme use.
Paypal is not part of the checkout process; you will need to email me to check on availability of the product, as they are manufactured to order. Once your order has been manufactured you will be notified by email that your order is complete. 


This product was added to our catalog on Thursday 15 August, 2013.

E-Mail Address


Shopping Cart
View Cart more
0 items

Use keywords to find the product you are looking for.
Advanced Search

Order Online
3D Cad Design
Terms & Conditions
Contact Us
© Prop Engineering